E550 automatic edge bander

automatic-edgebander-with-chain-feeding-system-premilling-corner-rounding-unit-e550cr-e550pmcr

TOUCHME ..7’’

The first and only figurative control with inmediate understanding on the market.

It is fitted with a figurative interface for programming and diagniostics. Productivity control in any moment.

User friendly from the first use.

PLC and ENCODER controlled logic functioning

Complete with:

- Thermostatic glue control with automatic stand-by and glue temperature Indicator

- Light-up LED buttons to select machine operating units

- Diagnostic system with messages for machine use and maintenance

- Statistical operating data: total hours of machine use, total and partial meters of edge used

• Chain panel feeder with rubber pads mounted on a steel chain with lubrication system

• Top pressure bar with a double row of rubber wheels mounted on bearings, height can be adjusted by means

of a handwheel fitted with a metric position dial.

• Pre milling group with diamond cutterblocks and two (HF) high frequency motors with Independent movement

• Feeding fence with micrometric adjustment

Variable milling from 0 to 2 mm, adjustable with a knob and numerical dial.

• Edge Feeding

feeding synchrony between the panel and the edge to guarantee a perfect glueing

• Pneumatic edge - cutting shear from coil with horizontal oscillatory movement.

• Teflon-coated glue pot allows complete and fast cleaning.

Fitted with 6 electrical heating elements (4 in the glue pot, 1 in the turret and 1 inside the glue spreading roller).

• N. 2 FLOATING pressure rollers:

First Ø 80 mm aluminum, second rubber

• Automatic Front/Rear End Trimming unit (straight cut) with copiers and integrated chipping collection

Possibility of independent front/rear cut selection from PLC.

• HF (High Frequency) motors

End trimming unit blade 2 x Ø 80 mm

• 4 - positions flush trimming unit with 2 (HF) high - frequency motors.

• Ø 75 mm cutterblocks, with Widia multi - profile knives for easy change between thin edge, thickness 1 mm,

thickness 2 mm and solid wood

Vertical and front disc copier

• Tool positioning with numerica dials

• Corner rounding unit (version PMCR) for plastic edges with Z4 Ø 50 mm diamond cutterblock with 2 mm

radius profile.

Group sliding with pads on linear guides.

- Front copier with stainless steel ring-pad

- Vertical/horizontal copier with 50 mm diameter wheel

• Front extensible support with rollers for large panels.

• CE LEGISLATION

Technical specifications

GENERAL
Feed speed	9 m/min
Panel thickness	min 8 – max 50 mm
Edge thickness in coils or strips	min 0,4 - max 3 mm
Edge thickness in strips (manual feeding)	max 5* mm
Maximum coil diameter	800 mm
Minimum panel length (processed side) with standard End trimming unit	110 mm
Minimum panel length (processed side) with V45 End trimming device Panel height h=18 mm Panel height h= 50 mm	180 mm 210 mm
Minimum panel width	70 mm
PRE-MILLING UNIT (PM version)
Max milling	2** mm
HF (High Frequency) motors power	2 x 0,75 kW
Diamond cutterblocks tool dimensions	Ø 60 x H54 mm
Tool rotation speed	12.000 RPM
GLUEING UNIT
Heating elements power (6 cartridges)	1,490 approx. kW
Glue heating time from ambient temperature	14-16 approx. min
Glue heating time from standby	4 - 6 approx. min
Hot melt (EVA) glue pot capacity	1 Kg
Polyurethanic (PUR) glue pot capacity (option)	0,5 kg
END TRIMMING UNIT
HF (high Frequency) motor power	0,22 kW
Blade rotation speed	12.000 RPM
FLUSH TRIMMING UNIT
Motors power	2 x 0,37 kW
Tool rotation speed	12.000 RPM
CORNER ROUNDING UNIT	(E550 PMCR)
Motor power	0,22 kW
Tool rotation speed	12.000 RPM
Minimum panel thickness	8 mm
Maximum panel thickness	45 mm
Minimum panel length	140 mm

* the maximum thickness of the strip depends on wood hardness
** Removal section according to material type

Technical specifications

Details of the machine

Touchscreen control

Touchscreen control - Easy to use, Intuitive and Immediate

7” Colour display
Possibility of processing with storable programs
Impossible to go wrong; the graphic visualizes directly the result of the process on the edged panel
Just one click to choose the desired workmanship

Glueing unit PURE (Opt)

It is possible to process material either with polyurethane (PUR) or EVA glue
With PUR glue it is possible to stop machine (up to 4 days) without having to effect any cleaning procedure.
Automatic cleaning of glue spreader roller
Glue roller with integrated heating uniform and constant glue temperature
Granule manual loading (glue pot 0,5 Kg)
Automatic glue drainage cycle. Equipped with a drip tank of the glue discharged during the drain cycle
Upon request an additional interchangeable glue pot is available.

Corner rounding unit for finishing corners on straight and shaped panels

Corner rounding unit (version PMCR) for plastic edges with Z4 Ø 50 mm diamond cutterblock with 2 mm radius profile.
Finishing of front and rear corners on straight, bevelled and postformed panels
Front copier with stainless steel ring-pad
Vertical/horizontal copier with 50 mm diameter wheel
Possibility to select from PLC the processed front, rear or complete panel

VR or VS end trimming group with vertical rounding or bevel function (Opt)

VR or VS end trimming group to remove and mill edge excess on front/rear side of the panel

2 processing modes:

“VR” radius (ABS and PVC thick edges)
straight (thin edges and wooden strips)
- or

“VS” bevel (thin edges)
straight (thin edges and wooden strips)

Unit managed by the electronic control with the possibility to specifically choose the processing mode for the front and the rear of the panel

High frequency motor 0,22kW – 12.000 RPM
Integrated dust extraction system that includes the la extractor hood of the wood chips and flexible hose for connection to the external port D=120mm

Glueing unit

PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS

• 6 heating elements to guarantee uniform glue temperature.
• Motorized glue spreading roller with an internal electrical heating element.
• Teflon-coated glue pot to permit complete and rapid cleaning.

End Trimming unit

PERFORMANCE AND VERSATILITY

• 2 blades for perfect front/rear end trimming on all types of edges
• Operating cycle controlled by PLC
• HF motor 200 Hz – 12.000 rpm – 0.22 kW
• Integrated suction system

Flush Trimming unit

FOUR PROCESSES

• Easy to change edge when processing Thin/Thickness 1 mm/ Thickness 2 mm/Soldi wood
• The system “reads” the edge thickness, making mistakes impossible!
• N. 2 motors HF 200 Hz. - 12.000 RPM - 0,37 Kw